Services
Bikeology only uses professional Park bicycle tools, the best for every bike. Book your next service in with us!
Different services and rates are detailed in the table below. Individual repairs and custom builds are tailored for your specific needs. These can be discussed to find out what is best for you and your bike within your budget.
Labour rate is charged at $1.50 per minute. Minimum charge is $20.00. Prices listed are minimums, and are labour only! Cost of parts/accessories not included. Prices include GST. Prices are subject to change at anytime.
- Bronze Service
- Advised every 3 months
- Gear tune and road test
- Brake adjust
- Spot true wheels
- Check nuts and bolts
- Lubricate chain
- Wipe down frame and wheels
- General inspection of the bike
- Silver Service
- Advised every 6 months
- Bronze Service PLUS:
- Fully degrease drive train, chain, chain rings and cassette
- Bearing check and adjust hubs, headset and bottom bracket
- Gold Service
- Advised every 12 months
- Silver Service PLUS:
- Intensive frame and component inspection
- Thorough frame clean
- Removal and reinstallation of all components for cleaning, degreasing and lubrication of moving parts
Consultation fee with supplied parts enquiry
Any advice required will only be included on hourly rate of $1.50 per/min (time charged includes emailing, phone calls etc)
Bike Fitting |
|
Bike fit (basic) |
$99 |
Bike fit (including pedal analysis) |
$240 |
Bike setup from supplied fit sheet specification |
$75 |
cleat fitting (including pedal analysis) |
$65 |
Insurance assessment |
|
Inspect and prepare a written assessment with valued costs for repair or renewal * |
$40 |
Bike requires cleaning for detailed assessment (if required) |
$30 |
*this cost will be offset on bike if purchased through Bikeology
Bicycle assembly |
|
Bike build |
$170 |
Bike build (mail order bike, supplied frame and or any parts supplied with frame) |
$300 |
Standard adjustments |
|
Gear adjustments |
$30 |
Brake adjustments |
$20 |
Headset adjustment |
$20 |
Handle bar adjustment |
$20 |
Saddle adjustment |
$10 |
Frame |
|
Face and reem headtube |
$75 |
Face and tap bottom bracket shell |
$60 |
Frame alignment check (seatstay and chainstay) |
$35 |
Frame alignment check with detailed analysis of results |
$60 |
Hanger alignment check |
$25 |
Disc Brake tab mount facing (bare frame) |
$35 |
Disc Brake tab mount facing (built frame) |
$45 |
Drivetrain components |
|
Client supplied parts |
Install of chain |
$15 |
$25 |
Install of Campagnolo 11 speed chain with Campagnolo 11speed tool |
$25 |
$35 |
Install Front derailleur (may require chain joining pin at additional cost) |
$20 |
$30 |
Install of rear derailleur |
$30 |
$40 |
Install of crankset and bottom bracket |
$40 |
$55 |
Install of chain catcher |
$20 |
$30 |
Install of cassette on wheel only |
$10 |
$20 |
Install of cassette on bike including road test |
$25 |
$35 |
Install of shift levers including fitting of cables and bar tape on road bike |
$75 |
95 |
Install mtb shifters fitting cables |
$70 |
$80 |
Install of chainring |
$20 |
$30 |
Install of all chain rings |
$25 |
$35 |
Install of bottom bracket on bare frame |
$10 |
$20 |
Install of bottom bracket on compete bike |
$35 |
$45 |
Removal of bottom bracket if seized |
$1.50 per/min |
|
Fork and headset |
|
Client supplied parts |
Install of fork onto bare frame |
$35 |
$45 |
Install of fork onto complete bike |
$45 |
$55 |
Install of star nut into steerer tube for off bike |
$5 |
$15 |
Install of star nut into fork on complete bike |
$20 |
$30 |
Install of headset into bare frame |
$20 |
$30 |
Install of headset into complete bike |
$35 |
$45 |
Strip clean, inspect and regrease headset |
$25 |
|
Braking components road bike |
|
Client supplied parts |
Install of road brake caliper front |
$20 |
$30 |
Install of road brake caliper rear |
$20 |
$30 |
Install of road brake pads per caliper |
$10 |
$15 |
Install of road bike brake inner and outer cables (bar tape requires-removal and possible renewal) |
$35 |
$55 |
Installation of braking callipers special carbon fibre type with specific tolerances |
$1.50 per/min |
|
Braking components mountain bike |
|
Client supplied parts |
Install of mtb hydraulic brake caliper front* |
$20 |
$30 |
Install of mtb hydraulic brake caliper rear |
$20 |
$30 |
Install of mtb V-brake pads and per caliper |
$15 |
$30 |
Install of hydraulic brake cutting hose to correct length and fitting rotor |
$25 |
|
Install of disc brake pads and alignment |
$20 |
$30 |
Brake bleed of hydraulic brake per brake |
$30 |
|
Specific level overhauls priced on hourly rate
|
$1.50 per/min |
|
*If hose shortening and re-bleeding is required there will be an additional charge
Body contact points, Handle bar, pedals saddle and stem |
Client suppled parts | |
Install road drop handle bar including shifters and bar tape |
$45 |
$55 |
Install bar tape |
$15 |
$30 |
Install stem or rotate stem |
$10 |
$20 |
Install quill stem |
$45 |
$55 |
Remove and install pedals |
$10 |
$15 |
Install saddle |
$10 |
$20 |
Remove and install saddle to measurements form bike |
$25 |
$35 |
Install mtb handle grips |
$5 |
$10 |
Install mtb bar ends |
$15 |
$30 |
Wheels |
|
Wheel build |
$75 |
De-lacing of wheel to keep specific spokes with manufactures hub |
$40 |
Wheel build exotic (internal nipples) |
$80 |
Replace spoke and true wheel |
$35 |
True wheel |
$25 |
Install of tube or tyre (wheel off of bike) |
$10 |
Install of tube or tyre (wheel on bike) |
$15 |
Front cones adjustments |
$20 |
Rear cones adjustment |
$25 |
Hub rebuild |
$40 |
Glue tubular tyre including glue |
$50 |
Power tap battery renewal |
$20 |
Install of new wheels (includes gear adjustment and hanger alignment) |
$20 |
Install of new wheels (internet supplied, includes gear adjustment and hanger alignment) |
$40 |
*please be aware if parts are supplied by the client and are found to be incorrect during build there will be double the charge for the time taken to undo the wheel and calculate the correct spoke lengths and then rebuild the wheel. We prefer to do all the spoke calculations in house and supply the spokes to prevent this from happening
Computer installation |
|
Client Supplied Parts |
Install computer Single/Dual Pickup |
$15 |
$25 |
Install computer battery and reprogram |
$10 |
|
Install Flight Deck |
$40 |
$55 |
Install Ergo brain |
$55 |
$65 |
Install Polar heart rate monitor |
$25 |
$35 |
Install all other Electronic Services (i.e. SRM, etc.) |
$1.50 per hour |
|
Suspension Servicing
All suspension forks servicing should be carried out as recommended by the fork manufacturers. These are normally expressed in riding time or kilometres ridden, therefore each fork must be individually discussed to recommend the correct level of service required.Labour rate is charged at $1.50 per minute. Minimum charge is $20.00. Prices listed are minimums, and are labour only! Cost of parts/accessories not included. Prices include GST. Prices are subject to change at anytime.